|
Access 4.x |
Initiating extended running via Digital input |
Momentary or toggle switch is used to activate DI of the extended running.
If the momentary switched is used - extended operation stop delay time has to be set.
In case of maintained switch - the extended operation will be active as long as the switch is on.
Example of setting digital input activated extended running |
|||
Variable |
Available options & Selection |
Note |
|
Activation of the function |
|||
Configuration > Functions > Function activation |
|||
Extended operation |
| No | Yes | |
||
Configuration of the function |
|||
Configuration > Functions > Extended operation |
|||
Extended operation low speed |
| No | Yes | |
Activate operation level(s) to be used in extended running |
|
Extended operation normal speed |
| No | Yes | |
||
Extended operation high speed |
| No | Yes | |
||
Configure inputs |
|||
Configuration > I/O allocation settings > Digital inputs > |
|||
Extended operation normal speed |
Any available I/O |
||
Running time |
|||
Time settings |
|||
Extended operation stop delay |
[0] min |
Extended running will stop in 0 minutes after deactivation of the DI |
|