|
Access 5.x |
Outdoor damper (Open/Closed) |
The straightforward use of the outdoor air damper is to shut close the intake in the air duct while the AHU is stopped or in recirculation mode.
Closing of the damper can be delayed while stopping the Supply air fan. This prevents under-pressure and possible damage to the ductwork created by the de-energized but still free-spinning fan.
Configuration of the outdoor air damper |
|||
Variable |
Available options & Selection |
Note |
|
Activate function |
|||
Configuration > Functions > Function activation > |
|||
Damper |
| No | | Outdoor air | | Outdoor air + Exhaust air | | Exhaust air | |
Activate function of the Outdoor air damper |
|
Allocating IOs |
|||
Configuration > I/O allocation settings > Digital outputs |
|||
Outdoor air damper |
Any available I/O |
Control signal to hardwired actuator. The DO can stay unconfigured for the modbus type actuator. |
|
Damper close delay |
|||
Data & Settings > Fan control > Supply air fan |
|||
Outdoor air damper stop delay |
[0] s |
Damper will remain open for the set time after stopping of the Supply air fan |
|
Graphical representation |
|||
Flowchart > Outdoor damper |
|||
|
Indication: Open / Closed |
||
The outdoor air damper can also be modulated to regulate intake of the fresh air. The modulated outdoor damper is controlled in combination with the mixing damper by the Air quality control function.