|
Access 5.x |
ACCESS CONNECT By Systemair |
To use this functionality your air handling unit has to be equipped with Access control unit CU27-C2 WiFi or CU40-C2 WiFi with integrated support for wireless connectivity using application software 5.0 or later.
Features:
- Search for control units using integrated wireless technology.
- Search for control units connected on the same Local Area Network (LAN) as the mobile device
Access Connect provides:
- Search for control units using integrated wireless technology.
- Search for control units connected on the same LAN as the mobile device.
- List available control units and mark your favorites for easy access.
- Visualize alarms and act on them.
- Connect to an Access control unit and access the user-friendly graphical interface for commissioning, monitoring and maintenance.
Access Connect nearby discovery (direct wireless connection controller <-> mobile device) only works if this service has been activated in the controller.
The service has been activated by default to ease the commissioning process on site.
It can be activated, deactivated and adjusted via controller's web configuration.
Variable |
Available options & Selection |
Note |
|
Enabling and adjusting ACCESS CONNECT |
|||
Configuration > System settings > Communication > ACCESS CONNECT by Systemair |
|||
Connection |
| Inactive | Active | |
| Inactive | - Nearby discover-ability is disabled. ACCESS CONNECT can still locate the controller if it shares the same network as the mobile device) | Active | - Nearby discover-ability is enabled. ACCESS CONNECT can locate all the controllers within Bluetooth signal reach |
|
Name |
BLE0 |
Connection info |
|
Connected clients |
0 |
||
Signal strength |
High quality |
||
BLECoverage |
| Low | Normal | High | |
Signal strength for direct nearby connection (Controller <-> mobile device): | Low | - standing next to the controller | Normal | - in the same room | High | - signal might penetrate thin walls |
|
Get ACCESS CONNECT By Systemair at
