Access 5.x

Input/Output allocation settings


I/O allocation settings show only sensors/signals that are activated in configuration.  The allocation of inputs and outputs defines the routes for data exchange between controller and connected devices.


The actual devices (sensors, fans, transmitters, switches, pumps etc.) that are not connected over internal BUS line should be hardwired directly to the controller‘s or expansion unit‘s terminals.

Variable

Note


Set a link between function and physical terminals

Configuration > I/O allocation settings >

Analog inputs >

In this section inputs and outputs of the functions must be mapped to the physical contacts of the controller or the expansion unit.  

Digital inputs >

Analog outputs >

Digital outputs >

Review the state of function I/Os and physical terminals

Data & Settings > In-/Output status > Raw values >

Analog inputs >

This section is intended for debugging and configuration check. Here you can view all available physical inputs of the system. It includes the I/Os of the controller as well as any expansion device connected via bus.

Digital inputs >

Analog outputs >

Digital outputs >