Temperature output

Access 4.x

Temperature output

The function enables conversion of a selected temperature to an analog output signal (voltage).

Two temperature values are related to the minimal and maximal voltages of the output signal.

Linear interpolation is used to determine output voltage for the measured temperatures.

For the correct interpretation, the settings of the output must match the settings of the external reading device.

Setting of the temperature output
	Variable	Available options & Selection	Note
	Run indication
	Configuration > Functions > Extra indications & outputs
	Temperature output	\| Select I/O \| \| Outdoor temperature \| \| Intake air temperature \| …	Select temperature to convert to voltage signal
	Temperature at Vmin	[-50]	Two point for the linear curve
	Temperature at Vmax	[150]	Two point for the linear curve
	Allocate analog output
	Configuration > I/O allocation settings > Analog outputs
	Temperature output	Any available I/O
	Configure output
	Configuration > I/O allocation settings > Analog outputs > Temperature output
	Name	[Temperature output]	Editable output name
	Original name	Temperature output
	Range output	\| 0-10 V \|	Vmin = 0V ... Vmax = 10V
		\| 2-10 V \|	Vmin = 2V ... Vmax = 10V
		\| 10-2 V \|	Vmin = 10V ... Vmax = 2V
		\| 10-0 V \|	Vmin = 10V ... Vmax = 0V

Chapter info

Last reviewed: 6/10/2021

Access version: 4.5-0-07 (2685)